RT81 Elite High Fidelity Vinyl Turntable
Record Player with Audio Technica AT95E Cartridge, Belt Drive, Built-in Preamp, High Mass MDF Wood Plinth
Color: Natural Walnut
Model:
PURE ANALOG LISTENING EXPERIENCE
Premium components allow this high fidelity belt driven turntable to recreate the performance the way the artist intended
HIGH PERFORMANCE CARTRIDGE
The Audio Technica AT95E featuring a diamond elliptical tipped stylus is designed to track your record grooves with greater precision & accuracy for high definition audio
SUPERIOR RECORD TRACKING
Enjoy perfect playback using the balanced aluminum S-Type tonearm ensuring the stylus is rested deep in your record’s groove, producing every audio detail indistinguishable from the original recording
HIGH MASS MDF WOOD PLINTH
The beautiful piano black finished cabinet is crafted from solid engineered (MDF) wood, incorporates isolation feet, an aluminum platter and a rubber platter mat which results in superior isolation from unwanted vibrations
CAPTIVATING SIGNAL CLARITY
Incorporating a high quality built-in Texas Instruments preamp, ground terminal and gold plated RCA line outputs that ensures warm, true sound
tracking force.
combinations.
suspension to isolate, absorb and dampen
vibrations.
tonearm balance.
applied to the stylus during playback.
Type
Rubber Mat
Preamp
Fidelity Vinyl Turntable
Specifications
Cabinet Specifications | ▼ |
---|---|
Cabinet Material | MDF |
Finish | High Gloss Walnut Real Wood Veneer |
Dust Cover | Yes - Tinted |
Turntable Specifications | ▼ |
Drive System | Belt Drive |
Motor | DC Motor |
Motor Isolation | Three Point Rubber Isolation |
Speed | 33 1/3 RPM, 45 RPM (78 RPM - No) |
Speed Variation | +/-1.00% |
Wow and Flutter | 0.2% |
Signal-to-Noise Ratio (Weighted) | 67dB or higher (A-weighted, 20kHz LPF) |
Signal-to-Noise Ratio (Unweighted) | 60dB or higher (unweighted, 20kHz LPF) |
Platter | Aluminum |
Diameter of Platter | 12", 30 cm |
Weight of Platter | 1.22 lbs (553 g) |
Height of Platter | 0.62 inches (16 mm) |
Auto-Stop | Yes |
Turntable Mat | Rubber |
Tonearm Specifications | ▼ |
Tonearm Type | Static Balanced, S-Type |
Supported Cartridge Weight | 0.12 to 0.23 oz (3.5 to 6.5 g) |
Counterweight | Yes – 3.53 oz (100 g) - Adjustable |
Anti-skating Adjustment | Yes |
Pivot Bearing | Yes |
Cueing Lever | Yes |
Tonearm Material | Aluminum |
Tonearm Wire | 36 AWG Litz Cable / 7 Strand |
Effective Tonearm Mass | 0.99 oz (28.2 g) |
Overhang | 0.76 inches (19.2 mm) |
Effective Tonearm Length | 8.82 inches (224 mm) |
Headshell Mount | H-4 Bayonet Mount |
Tonearm Height | 0.67 inches (17 mm) |
Cartridge Specifications | ▼ |
Cartridge Type | Dual Moving Magnet (MM) |
Cartridge Model | Audio Technica: AT95E |
Replacement Stylus | ATN95E |
Stylus | 0.4 × 0.7mil Bonded Elliptical (Diamond) |
Cantilever | Aluminum |
Mount | Half inch |
Frequency Response | 20 - 20,000 Hz |
Channel Separation | 20 dB at 1 kHz |
Channel Balance | 2.0 dB or less at 1 kHz |
Load Impedance/Capacitance | 47k Ohms/100 pF |
Output Voltage | 3.5 mV (+/–3 dB) |
Cartridge Weight | 5.7 g (+/- 0.5 g) |
Headshell Weight | 0.38 oz (10.7 g) |
Cartridge Height | 0.67 inches (17 mm) |
Recommended Tracking Force | 2.0 g (+/–0.5 g) |
Vertical Tracking Angle | 20 degrees (Non-Adjustable) |
Rubber Belt Specifications | ▼ |
Rubber Belt Design | Continuous loop (joint-less) |
Width | 0.17 inches (4.5 mm) |
Length | 21.03 inches (534.07 mm) |
Thickness | 0.02 inches (0.6 mm) |
Output Specifications | ▼ |
Connector | RCA (Gold-plated) |
Phono Preamp | Yes, PHONO/LINE Switchable |
Phono Output | 3.5 mV (+/–3 dB) |
Phono Bypass | Yes, all electronics bypassed when using external preamp |
Line Output | 140 mV (–17 dBV) |
Ground Terminal | Yes |
Power Specification | ▼ |
Input | 100 - 240V AC (50/60Hz) |
Output | 12 V / 500 mA |
Consumption | 1.5 W |
General Specifications | ▼ |
Dimensions | 5.75 x 16.5 x 14.25 inches / 14.6 x 41.9 x 36.2 cm (HxWxD) |
Unit Weight | 14.1 lb (6.4 kg) |
Operating Temperature | 20° C |
Wireless Playback | No (Requires Bluetooth or WiFi transmitter connected via RCA connection to transmit audio wirelessly) |
Fluance Speaker Size Comparison Chart | |
Certifications | FCC Certified, RoHS, CUL/UL |
UPC | 061783264362 |
What's Included |
What's Included
Frequently Asked Questions
Fluance turntables do not include built in speakers.
To use a Fluance turntable, connect it to a home theater receiver or amplifier for use with passive speakers, or connect it to a set of powered speakers such as the Ai41 Powered Bookshelf Speakers.
If your receiver or speakers do not have a specific PHONO input or integrated preamp, RT80 and RT81 both include an internal preamp for quick and easy setup.
Fluance turntables do not include built in speakers.
To use a Fluance turntable, connect it to a home theater receiver or amplifier for use with passive speakers, or connect it to a set of powered speakers such as the Ai41 Powered Bookshelf Speakers.
If your receiver or speakers do not have a specific PHONO input or integrated preamp, RT80 and RT81 both include an internal preamp for quick and easy setup.
If you’re using an amplifier without a phono input, or some powered speakers such as our Ai41 model, you will need to use the preamp by sliding the switch to the “LINE” position.
The tonearm of the RT80 and RT81 model turntables is compatible with cartridges from 3.5 grams to 6.5 grams in weight.
For full instructions on this process, see our video below: