PA10 High Fidelity Phono Preamp

With RIAA Equalization for MM Turntables

Rating:
93%
$99.99 USD
PA10 High Fidelity Phono Preamp
PA10 High Fidelity Phono Preamp
UNCOMPROMISED PHONO AMPLIFICATION AND EQUALIZATION

UNCOMPROMISED PHONO AMPLIFICATION AND EQUALIZATION

Precisely converts the turntable phono signal to line level, featuring an ultra high-accuracy frequency response to faithfully reproduce the original recording to the RIAA standard

SOPHISTICATED CIRCUIT DESIGN

SOPHISTICATED CIRCUIT DESIGN ENGINEERED WITH PREMIUM COMPONENTS

High accuracy components, low noise power supply, and low impedance output stage achieve greater RIAA specification, gain performance and lower distortion

VIVID STEREO SOUNDSTAGE

VIVID STEREO SOUNDSTAGE

Utilizing individual left and right channel OP amps provide optimal channel separation and virtually no crosstalk during signal reproduction and amplification stages

LOW FREQUENCY RUMBLE FILTERING

LOW FREQUENCY RUMBLE FILTERING

This selectable high pass filter rolls off the low end frequencies below 20Hz. This slow gentle roll off is helpful to reduce subsonic resonant feedback and noise when listening at loud volumes

PROTECTED FROM ANY ELECTRONIC INTERFERENCE

PROTECTED FROM ANY ELECTRONIC INTERFERENCE

Internal metal shielding enclosure to block electro-magnetic interference and electronic noise

Specifications

Specifications
Audio Specifications â–¼
Audio Circuit Type Passively Equalized RIAA
Compatible Stylus MM
Gain 38 dB
Phono Input Sensitivity 30 mV
Total Harmonic Distortion (THD) 0.00%
RIAA Equalization Accuracy (deviation) 20 Hz - 20 kHz +/- 0.5 dB
Signal/Noise (S/N) Ratio > 90 dB
Crosstalk > -86 dB
Input Impedance 47 kohm
Input Load Capacitance 100 pF
Output Impedance 100 ohm
Output Voltage 2.2 V
Maximum Input @ 1 kHz 100 mV
Maximum Phono Stage Output 125 mV
High Pass Filter Cutoff 20 Hz
Dynamic Range > 85 dB
Input/Output Specifications â–¼
Input RCA L/R (Gold Plated)
Output RCA L/R (Gold Plated)
Ground Terminal Yes
Cabinet Specifications â–¼
Cabinet Material MDF
Finish PVC Wood
Color Black
Power Specification â–¼
Power Input 110 V - 240 V ~ 50/60 Hz 0.5 A
Power Adapter Output 24 V, 500 mA
Power Consumption 0.4 W
General Specifications â–¼
Dimensions 4(L) x 2.25(H) x 3.6(D) inches (101.5 x 57.1 x 91.5 mm)
Weight 11.5 oz (325 g)
Operating Temperature -5°C - 45°C
Noise Floor (Unweighted) < 220 uV
Compatible With Fluance RT80, RT81, RT82, RT83, RT84, and RT85 turntables as well as any turntables that are equipped with a Moving Magnet cartridge
UPC 061783269794
What's Included

PA10 Preamplifier Lineout

Click to Expand

  • PA10 Unit
  • Power Adapter
  • User Manual
  • Fluance Catalog
  • Lifetime Customer Support
  • 2 Year Manufacturer’s Warranty
  • What's Included

    Write Your Own Review
    You're reviewing:PA10 High Fidelity Phono Preamp
    Your Rating

    Guides

    Take a comprehensive look at the set up, function, and maintenance of your product. The product manual details all of its specifications and how to care for your Fluance product.

    Frequently Asked Questions

    What audio cables should I use with PA10?

    While audio cables are not included with the PA10, we offer high quality RCA audio cables for use with our turntables and preamp! We recommend grounding both the turntable and speakers to the preamp for the cleanest signal quality.

    When do I need a Preamplifier?

    A preamp converts a weak signal from a turntable into a signal strong enough to be sent through an amplifier or powered speakers without noise or distortion.
    A preamp is required when your turntable does not have one internally, such as the Reference series turntables, or when your receiver or powered speakers do not have a PHONO input.

    Does the PA10 use RIAA equalization?

    Absolutely! The PA10 preamplifier uses RIAA equalization to provide you with an ultra high-accuracy frequency response so you can listen to your favorite music the way it was meant to be heard.

    Is this preamplifier the same as the one in the Classic and Elite turntables?

    While the preamplifier found in the Classic and Elite turntables is a quality preamp, the PA10 external preamp is a high-performance model and very different from the internal preamp.

    PA10 outputs at 37.5dB compared to the 34dB of the internal models and also includes 4 single channel preamp chips as opposed to 1. This provides your speakers with a strong signal requiring less amplification, reducing distortion at higher volume.

    Articles from our experts

    We found other products you might like!

    © 2024 Fluance. All Rights Reserved.