PA10 High Fidelity Phono Preamp
PA10 High Fidelity Phono Preamp
UNCOMPROMISED PHONO AMPLIFICATION AND EQUALIZATION
Precisely converts the turntable phono signal to line level, featuring an ultra high-accuracy frequency response to faithfully reproduce the original recording to the RIAA standard
SOPHISTICATED CIRCUIT DESIGN ENGINEERED WITH PREMIUM COMPONENTS
High accuracy components, low noise power supply, and low impedance output stage achieve greater RIAA specification, gain performance and lower distortion
VIVID STEREO SOUNDSTAGE
Utilizing individual left and right channel OP amps provide optimal channel separation and virtually no crosstalk during signal reproduction and amplification stages
LOW FREQUENCY RUMBLE FILTERING
This selectable high pass filter rolls off the low end frequencies below 20Hz. This slow gentle roll off is helpful to reduce subsonic resonant feedback and noise when listening at loud volumes
PROTECTED FROM ANY ELECTRONIC INTERFERENCE
Internal metal shielding enclosure to block electro-magnetic interference and electronic noise
Overview
Specifications
| Audio Specifications | ▼ |
|---|---|
| Audio Circuit Type | Passively Equalized RIAA |
| Compatible Stylus | MM |
| Gain | 38 dB |
| Phono Input Sensitivity | 30 mV |
| Total Harmonic Distortion (THD) | 0.004% |
| RIAA Equalization Accuracy (deviation) | 20 Hz - 20 kHz +/- 0.5 dB |
| Signal/Noise (S/N) Ratio | > 90 dB |
| Crosstalk | > -86 dB |
| Input Impedance | 47 kohm |
| Input Load Capacitance | 100 pF |
| Output Impedance | 100 ohm |
| Output Voltage | 2.2 V |
| Maximum Input @ 1 kHz | 100 mV |
| Maximum Phono Stage Output | 125 mV |
| High Pass Filter Cutoff | 20 Hz |
| Dynamic Range | > 85 dB |
| Input/Output Specifications | ▼ |
| Input | RCA L/R (Gold Plated) |
| Output | RCA L/R (Gold Plated) |
| Ground Terminal | Yes |
| Cabinet Specifications | ▼ |
| Cabinet Material | MDF |
| Finish | PVC Wood - Black |
| Power Specification | ▼ |
| Power Input | 110 V - 240 V ~ 50/60 Hz 0.5 A |
| Power Adapter Output | 24 V, 500 mA |
| Power Consumption | 0.4 W |
| General Specifications | ▼ |
| Dimensions | 4(L) x 2.25(H) x 3.6(D) inches (101.5 x 57.1 x 91.5 mm) |
| Weight | 11.5 oz (325 g) |
| Operating Temperature | -5°C - 45°C |
| NOISE FLOOR (UNWEIGHTED) | < 220 uV |
| Compatible With | Fluance RT80, RT81, RT82, RT83, RT84, and RT85 turntables as well as any turntables that are equipped with a Moving Magnet cartridge |
| What's Included | PA10 Preamplifier LineoutClick to Expand |
| UPC | 061783269794 |
Customer Reviews
-
Great product. This product really simplifies the set up with a Fluance Ai60's and a Fluance Turntable. Completely happy with this purchase.
-
Wooden cabinet looks great . Clean and natural sound. On/off button would be nice.
-
I'm very impressed with this preamp. It's a definite improvement over my previous preamp. The channel separation is fantastic. Paired with my new RT-85, I'm constantly in awe of how much more life has been brought to my listening experience.
-
I love this pre-amp. My previous was not grounded, and did not match my setup. This sounds amazing, and looks great paired with the RT85 and Ai40 speakers.
-
This is one of the pre-amps you can get for under $100. Cross talk has been eliminated. It is clear and sounds great! I have a USB powered pre-amp that cost the same and it does not compare to the PA10. It supports all Ortofon cartridges even the Black one. amazing.
-
J'Ai possédé plusieurs tables-tournante dans ma vie et celle si est celle qui ma donné le son que je recherchait depuis longtemps. Un son cristallin comme j'aime et qui donne le goût d'écouter nos vinyle. Autre point fort ,le moteur , il est vraiment silencieux ont ne l'entend pas du tout et n'est aucunement capté par le stylet Rapport qualité /prix ont ne peux espérer mieux . Maintenant que je sait que je peut me fier aux produit Fluence , ma RT83 n'est que le début de mes achats.
Translation:
I have owned several turntables in my life and that is the one that gave me the sound I was looking for a long time. A crystalline sound as I like and that gives the taste to listen to our vinyl. Another highlight, the engine, it is really quiet have not heard at all and is not captured by the stylus Value for money can not hope better. Now that I know I can rely on Fluence products, my RT83 is just the beginning of my shopping. -
After watching a youtuber review this model of phono preamp along with others in it's price range, I was a little worried about purchasing the PA10 because the vocals didn't sound as crisp as the others.
After hooking it up to my RT82 and playing a bunch of different genres I have to say that to my ears, personally, it sounds great and is a big step up from what I was using previously. For that reason alone I can't give it any less than 5 stars. -
This phono preamp looks fantastic. It has a good design, looks very well made and works just fine.
My only observation is that it does not come with a ground RCA cable. It would have been handy to come with it since some speakers don't have ground terminal, therefore; they don't come with these type of cables that your are going to need with this preamp. -
Great product for a great price
Resources
Manual
Video
FAQs
A preamp is required when your turntable does not have one internally, such as the Reference series turntables, or when your receiver or powered speakers do not have a PHONO input.
PA10 outputs at 37.5dB compared to the 34dB of the internal models and also includes 4 single channel preamp chips as opposed to 1. This provides your speakers with a strong signal requiring less amplification, reducing distortion at higher volume.
