I have ordered these stands directly from Flunace and my experience was awesome dealing with Flunace Support Executive Brent. He helped to to track my item. Assembly of stands were breeze and quality is quite good. I will surely buy them again.

I really appreciate the design and hidden wire feature. The assembly can be a bit challenging but end result is what I expected.

Great speaker stands easy to install, perfect height for surround speakers

Solid built and works well for the rear surround speakers. I have the Reference High Performance 2-Way Bipolar Surround Speakers which are kind of heavy. These stands are well balanced and have good carpet spikes.

i assembled the speaker stands from this order today and i am exceedingly disappointed in them. I was so impressed in the quality of my RT81 turntable and ai41 powered speakers that it was a no brainer to get the speaker stands, but they are not in the same quality standards of your other products. There is so much over spray and gunk in all of the assembly nuts that what should have been a simple assembly was not. One of the rods could not be tightened enough due to over spray in the threads (and the fact that there is no way of tightening with a tool everything is just finger tightening) so i had to add a washer in order to create enough contact.
Then all of the carpet spikes had the same over spray/ finger tightening issues, i got them all in but undoing them if i ever want to use them on a solid floor ever will be an issue.
Then after the shotty assembly was finally finished, i went to route the wiring through the cable management hole on the bottom of the stands, and not one of my RCA connectors, banana connectors, or the fluance powercord would fit through the tiny hole allotted at the base. I will grant that the banana connectors and rca wires are upgraded from the fluance provided ones but the power cord is the one provided, and the universal application of the stand should allot for this.

I am highly disappointed by the quality of the stands after all of this and honestly believe i could have purchased pretty much any no name junk stand off Amazon and had as good or better of a product delivered. I think you should re-evaluate the sale of these stands if you want to continue overwelming people with your cost/ performance value that you offer with your turntables and speakers. There is no reason to sell such a comparitively poor product which may negitively affect the brand image that your company has done so well establishing. These stands could have cost 50% more and i still would have bought them, and if the quality matched the price i would have been satisfied. By attaching your name to these (and I understand that youre an electronics company, not a furniture/ stand company) i honestly dont understand where you would end up with a positive outcome.

Easy to build, quality is good, machining could've been better on a few parts but it's nothing you'll be able to see once it's all put together. Overall, I like. would recommend.

Good Stands, I was surprised how sturdy they were. I think the speakers will survive with the kids being rambunctious around them. Even on carpeting.

I needs some stand for my new speakers in my theater room. These are great. Easy to assemble and the bottoms come with 4 pointed metal feet that screw in. These keep the stand steady when you have them sitting on carpet like I do. Very nice units and I would highly recommend.

I love these speaker stands!! I've owned Fluance Ai41 bookshelf speakers for a few years now, and was very happy to see these stands come out! Finding a decent spot for speakers was a challenge for me, and other stands I tried were too flimsy for me to feel comfortable with them. These are perfect! I'm sure using them with Fluance speakers helps, since the sizing is on point, but I'm sure they would work well with other speakers as well. The design (slots on the back) lends itself well to cable management, and the stands feel extremely secure. These also make it so much easier to angle the speakers properly for a good home audio setup, as opposed to other options for storing speakers. I highly recommend these!!

The stands were harder to assemble than a different pair that I assembled, but still within the easy to mildly challenging category. They look good and the bases are larger than on my other pair of stands. That's good because a larger base means more stability.It takes into account cable management by providing a path with holes and recessed slots to cleanly run the cables through the column.It comes with rubber feet and optional spiked feet for carpets. The spikes are for safety. If you step on the base while it's on carpet, a potential sliding disaster is averted.Recommended.

I use these stands for the Fluance Signature Series Bi-polar speaker.

I was happy to see Fluance released these as I have the RT82 and Ai41 speakers and have had a good experience using their products so far. The stands were easy to set up and fit with my Ai41 speakers perfectly. I do wish the hole at the bottom to fit cables was slightly larger to easier fit the power cord for my speakers, but no complaints otherwise. From what I've seen they are in similar price range as other quality speaker stands as well. Definitely recommend!

The bottom piece is not even wood or metal. Just pressed cardboard cheap type wood that is painted. Do not tighten bolt too much or you will ruin bottom base. I had to use washers to get tight and not wreck the other base. They look fine when done. Not worth the price.